ADBL Super Polish

ADBL Super Polish is a medium-cut polishing compound designed to remove moderate scratches and restore a deep gloss, even in one-step paint correction. It easily eliminates sanding marks from P2000 grit paper and effectively removes micro-scratches caused by automatic car washes or daily use.

Thanks to its advanced technology and uniform abrasive grain—ten times finer than conventional compounds—it delivers strong correction power with minimal dusting and reduced working time.

The water-based, silicone-, filler-, and wax-free formula ensures clean polishing, leaving a transparent film for easy inspection during work. Depending on the choice of pad and machine, ADBL Super Polish can be used as part of a multi-stage correction or as a one-step solution for medium-hard paints.

Compatible with rotary and dual-action polishers, and suitable for wool, foam, or microfiber pads, it leaves a smooth, mirror-like finish perfectly prepared for coatings or waxes. A pleasant scent makes the polishing process more enjoyable.

Scent: Banana

NOTE:

Using too much compound, applying excessive pressure, or working at too high a machine speed does not improve performance and may lead to:

• Pad overloading,
• Difficult residue removal,
• Premature drying and increased dusting,
• Formation of “compound borders” around the polished area, which become hard to remove once dry.

HOW TO USE:

1. Attach the pad evenly to the backing plate.
2. Apply 4 beads on the pad.
3. Place the pad flat against the panel to be treated.
4. Turn the machine on in the lowest gear without using much pressure and spread the paste over an area of the panel of maximum 40 x 40 cm.
5. Increase the speed of the machine up to 3-4 gear while gently increasing the pressure.
6. Work constantly, maintaining the flat position of the pad on the paintwork
7. After the paste is used up (transparent film), wipe the residue with a delicate microfibre cloth.